Dayton 3VG79B User Manual

Operating Instructions & Parts Manual

3VG79B

Dayton Portable Forced
Air Heater

Description

Dayton Model 3VG79B is a 200,000 Btu/Hr heater. This heater uses only Kerosene
or No. 1 fuel oil for combustion and electricity to run the motor. It is primarily
intended for indoor and outdoor temporary heating of well-ventilated buildings
under construction, alteration, or repair. It may be used in agricultural, industrial,
and commercial environments.

Form 5S4068

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.

Unpacking

1. Remove all packing items supplied

with heater for shipment.

2. Remove all items from carton.

3. Check items for any shipping

damage. If heater is damaged,
promptly inform dealer where you
bought heater.

Figure 1 - Model 3VG79B

ARL LOGO

G 004

Amperage

Electrical Input

(during normal run)

120 Volt/60 Hertz

3.6

ELECTRICAL SPECIFICATIONS

GENERAL SPECIFICATIONS

Output

Hot Air Output

Fuel Tank Capacity

Fuel Consumption

Rating Btu

(CFM Approx)

Fuel

(U.S. Gallons)

(U.S. Gallons/Hr.)

200,000

600

Kerosene or No. 1 fuel oil

13.5

1.4

Air Pump

Heater Weight

Motor RPM

Pressure (psi)

(Pounds - with fuel)

(Pounds - without fuel)

3400

6.2

Version B - For Reduction

G016.J

Printed in U.S.A.
03430
0700/256/VCPVP