Sharp AE-Z48LZ User Manual
9
The unit works at the maximum power and op-
timum louvre direction to quickly cool or warm
the room.
timum louvre direction to quickly cool or warm
the room.
1
During operation, press the FULL
POWER button.
• The remote control will display “
” and
AIR FLOW symbol will get longer.
• The temperature display will go off.
• The green FULL POWER lamp (
) on the
unit will light up.
• The vertical airfl ow louvre will be set obliquely
downward.
TO CANCEL
Press the FULL POWER button again.
• The green FULL POWER lamp (
• The green FULL POWER lamp (
) on the unit
will turn off.
• The vertical airfl ow louvre will return to the original
direction.
NOTE:
• The unit will operate at “Extra HIGH” fan speed
for 5 minutes, and then shift to “HIGH” fan speed.
• You can not set the temperature or fan speed
during the FULL POWER operation.
• To turn off the FULL POWER lamp, press the
DISPLAY button.
• The ENERGY SAVING operation and the FULL
POWER operation can not be used together.
FULL POWER OPERATION
ENERGY SAVING OPERATION
The temperature set point is automatically
controlled to save energy.
controlled to save energy.
1
During operation, press the ENERGY
SAVE button.
• The remote control will display “
”.
• The fan speed will be set to AUTO.
TO CANCEL
Press the ENERGY SAVE button again.
NOTE:
• In HEAT mode, the temperature set point will be
automatically fl uctuated between 0 - 2 °C lower
than the original temperature setting.
than the original temperature setting.
In COOL or DRY mode, the temperature set point
will be automatically fl uctuated between 0 - 1 °C
higher than the original temperature setting.
higher than the original temperature setting.
• The ENERGY SAVING operation and the FULL
POWER operation can not be used together.
1
1
AY ZP48LZ_eng_cov.indd 9
09.10.30 2:17:07 PM