Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sharp
  4. AE-Z48LZ
  5. User Manual

Sharp AE-Z48LZ User Manual

Download
Page of 20
14
MAINTENANCE AFTER HEAT PUMP 
SEASON
1
 Operate the unit in the SELF CLEAN 
operation to allow the mechanism to 
thoroughly dry.
2
 Stop the operation and turn off the 
circuit breaker. 
3
  Clean the fi lters, then reinstall them.
MAINTENANCE BEFORE HEAT PUMP 
SEASON
1
 Make sure that the air fi lters  are  not 
dirty.
2
 Make sure that nothing obstructs the 
air inlet or outlet.
CHANGING THE AIR PURIFYING FILTER
The air purifying fi lters should be changed every 3 
~ 6 months
1
  Remove the air fi lters.
2
  Change the air purifying fi lters.
 1 Take off the old air purifying fi lters from the 
air fi lters.
 
2 Set the new air purifying fi lters, under the 
fi lter stoppers located on the air fi lters.
3
  Reinstall the air fi lters.
NOTE:
• The dirty air purifying fi lters are not washable 
for reuse. The new fi lters are available at your 
nearest dealer.
Disposal of Filters
Please dispose of replaced fi lters according to the 
local disposal laws and regulations.
AIR PURIFYING fi lter materials
Filter:Polypropylene
Frame:Polyester
MAINTENANCE
Be sure to stop the operation and turn off the 
circuit breaker before performing any mainte-
nance.
CLEANING THE FILTERS
The air fi lters should be cleaned every two weeks. 
1
  Turn off the unit.
2
 Remove the fi lters.
 1  Lift the open panel.
 
2 Push the air filters up slightly to unlock 
them.
 
3  Pull the air fi lters down to remove them.
3
  Take off the air purifying fi lters from the 
air fi lters.
4
 Clean the fi lters.
Use a vacuum cleaner to remove dust. If the 
fi lters are dirty, wash them with warm water and 
a mild detergent. Dry fi lters in the shade before 
reinstalling.
5
  Reinstall the air purifying fi lters.
6
 Reinstall the fi lters.
 
1 Reinstall the fi lters in the original positions.
 
2  Close the open panel.
CLEANING THE UNIT AND THE REMOTE 
CONTROL
•  Wipe them with a soft cloth.
• Do not directly splash or pour water on them. It 
can cause electrical shock or equipment damage. 
• Do not use hot water, thinner, abrasive powders 
or strong solvents.
Filter stopper
2
1
1
3
2
Air fi lter
Air purifying fi lter
AY ZP48LZ_eng_cov.indd 14
09.10.30 2:17:09 PM