Bard QW2S1 User Manual
Manual 2100-532B
Page
Page
46 of 46
THE FOLLOWING INFORMATION IS NEEDED
TO CHECK PERFORMANCE OF UNIT
FLUID SIDE DATA
Cooling **
Heating
9. Entering fluid temperature
F
10. Leaving fluid temperature
F
11. Entering fluid pressure
PSIG
12. Leaving fluid pressure
PSIG
13. Pressure drop through coil
PSIG
14. Gallons per minute through the water coil
GPM
15. Liquid or discharge line pressure
PSIG
16. Suction
line
pressure
PSIG
17. Voltage at compressor (unit running)
V
18. Amperage draw at line side of contactor
A
19. Amperage at compressor common terminal
A
20. * Suction line temperature 6” from compressor
F
21. * Superheat at compressor
F
22. * Liquid line temperature at metering device
F
23. * Coil
subcooling
F
INDOOR SIDE DATA
Cooling **
Heating
24. Dry bulb temperature at air entering indoor coil
F
25. Wet bulb temperature of air entering indoor coil
F
26. Dry bulb temperature of air leaving indoor coil
F
27. Wet bulb temperature of air leaving indoor coil
F
28. * Supply air static pressure (packaged unit)
WC
29. * Return air static pressure (packaged unit)
WC
30. Other information about installation
** When performing a heating test insure that second stage heat is not activated.
* Items that are optional