Mitsubishi Electronics MUZ-GE33VA User Manual

NOTE: Turn OFF power supply before disassembly.

(1) Remove the screw fixing the service panel.
(2) Pull down the service panel and remove it. 
(3) Disconnect the power supply and indoor/outdoor con-

necting wire.

(4) Remove the screws fixing the top panel.
(5) Remove the top panel.
(6) Remove the screws fixing the cabinet.
(7) Remove the cabinet.
(8) Remove the screws fixing the back panel.
(9) Remove the back panel.

86

(1)  Slide the sleeve and check if there is a locking lever or not.

(2)  The terminal with this connector has the 
      locking mechanism.

Slide the sleeve.
Pull the terminal while 
pushing the locking
lever.

Hold the sleeve, and 
pull out the terminal 
slowly.

Back 
panel

Service 
panel

Screws of the 
top panel

Screws of 
the cabinet

Screws of 
the top panel

Screw of the 
service panel

Direction to 
remove

Screws of 
the cabinet

Hooks

<"Terminal with locking mechanism" Detaching points>

The terminal which has the locking mechanism can be detached as shown below.
There are two types (refer to (1) and (2)) of the terminal with locking mechanism.
The terminal without locking mechanism can be detached by pulling it out.
Check the shape of the terminal before detaching.

Screw of the 
cabinet

Screws of the 
terminal block 
and the back 
panel

OBH532E