Mitsubishi Electronics SKM35ZD-S User Manual
– 4 –
Page 10
Page 11, 12
There are two timers, for ON and OFF.
They can be set as desired.
They can be set as desired.
Page 13
When using the timer to switch on, the sys-
tem become operational shortly before the
set time, depending on the room tempera-
ture so that the desired temperature is
reached at the set time.
tem become operational shortly before the
set time, depending on the room tempera-
ture so that the desired temperature is
reached at the set time.
Choice of operations and features
Characteristics
Amenity facility
TIMER procedure
• AIR SCROLL
This function sets the unit at the most suitable angle
for blowing, imitating a natural breeze.
for blowing, imitating a natural breeze.
• MEMORY FLAP
Once the flap position has been set, the unit will
memorise it and continue in the same position the
next time.
memorise it and continue in the same position the
next time.
Page 8
Automatic selection of operating mode.
The Auto mode automati-
cally selects the operation
mode (HEAT, COOL or
DRY), depending on the
room temperature when
switched on.
cally selects the operation
mode (HEAT, COOL or
DRY), depending on the
room temperature when
switched on.
Adjustment of
airflow
AUTO
Page 9
Cooling by extracting heat from the room.
COOL
Choise of operations
Page 9
The unit draws in heat from the outside air, transfers it inside and
heats the room.
heats the room.
HEAT
Page 9
Drying by extracting damp from the room.
Functioning of micro-computer depends on setting and room tem-
peratures. It dehumidifies while keeping room temperature almost
constant.
peratures. It dehumidifies while keeping room temperature almost
constant.
DRY
Page 9
Turning up the power operates the air condi-
tioner in the power cooling and heating
mode.
tioner in the power cooling and heating
mode.
HI POWER mode
Page 9
This is an economic and healthy level of op-
eration.
eration.
ECONOMY mode
RWA012A226_En
03.8.27, 6:46 PM
4