Hitachi rac-e24cak User Manual

– 6 –

REMOTE CONTROLLER
This controls the operation of the indoor unit. Signal range to reach indoor unit is about 7 meters. If 
inverter lamp is used, the range of control may be shorter.
This unit can be fi xed on a wall using the fi xture provided. Before fi xing it, make sure the indoor unit 
can be controlled from the remote controller.

●

 

The transmission sign blinks when a signal is sent.

●

 

This indicates the room temperature selected, timer status, function 
and intensity of circulation selected.

●

 

Use this button to set air circulation in the room or start operation.

●

 

Use this button to reduce humidity in the room or start operation.

●

 

Use this button to set cooling mode in the room or start operation.

●

●

 

Press this button to stop operation only.

●

 

Use this button to set the sleep timer.

●

  This determines the fan speed. Each time you press this button, 

the intensity of circulation will change from    (AUTO) to    (HI) 
to    (MED) to    (LOW) 

●

 

Controls the angle of the horizontal air defl ector.

●

  Use this button to raise or lower the temperature setting. (Keep 

pressed, and the value will change more quickly.)

●

OFF-TIMER button   Select the turn OFF time.

●

ON-TIMER button   Select the turn ON time.

●

  Do not put the remote controller in the following places.

●

  In direct sunlight.

●

  In the vicinity of a heater.

●

  Handle the remote controller carefully. Do not drop it on the 

fl oor, and protect it from water.

●

  Once the outdoor unit stops, it will not restart for about 3 

minutes (unless you turn the power switch off and on or unplug 
the power cord and plug it in again).

 

This is to protect the device and does not indicate a failure.

RAS-RAC-E24CAK (2).indd 6

12/10/10 2:29 PM