Haier AS102AMARA User Manual
Insulating Material
Non-adhesive Tape
Piping Layout
Left
Right Back
Right
Down
Insulating Material
Piping Cover
Pipe Clip
Drain Hose
Valve Cover
Connection Wire
Insulating Material
Mounting Plate
more
than
60
cm
more
than
10
cm
more
than
15
cm
More
than
10
cm
More
than
60
cm
more
than
10 cm
more
than
5
c
m
more
than
10 cm
22
Installation Drawing for Indoo and Outdoor Units
r
Installation
11
With the time set function, the air conditioner can be turned on and off automatically at your
set time.
set time.
You can let your air conditioner be turned on or off automatically after you wake up in the morning,
before you come back from work in the evening, or after you fall asleep at night.
before you come back from work in the evening, or after you fall asleep at night.
The operation mode is displayed on the LCD of the remote controller, and the working method
indicator on the indoor unit lights up.
indicator on the indoor unit lights up.
Press
TIMER
button to change the timer mode, each press makes
the timer mode change in the following sequence:
1. After turning on the air conditioner, select your desired mode.
2. Timer Setting
The timer mode displays
off
or
on
.
The time displayed indicates the time set last time.
The timer mode on the indoor unit lights up.
The timer mode on the indoor unit lights up.
No Display
OFF
ON
Timer Off
Timer On
Press
TIMER
button:
Every time the button is pressed, time increases one hour.
If the button is kept depressed, time will change quickly.
Every time the button is pressed, time decreases one hour.
If the button is kept depressed, time will change quickly.
Time can be adjusted within 12 hours . Time will be shown on
LCD.
The time setting is to automatically turn on or off the air
conditioner a certain number of hours later
Time can be adjusted within 12 hours . Time will be shown on
LCD.
The time setting is to automatically turn on or off the air
conditioner a certain number of hours later
3. Time Setting
Notes: Selecting
No Display
cancels the timer mode.
Notes:
After the batteries are replaced, the time set resumes as below:
Time set off for 1 hour;
Time set on for 6 hours.
If necessary, time can be reset; after power goes out, time
should be reset.
After the batteries are replaced, the time set resumes as below:
Time set off for 1 hour;
Time set on for 6 hours.
If necessary, time can be reset; after power goes out, time
should be reset.
Cancel Timer Mode
Just press TIMER button until TIMER mode disappears on LCD.
Just press TIMER button until TIMER mode disappears on LCD.
Time Set Operation
Operation
HEALTH
TIMER
TEMP
ON/OFF
RESET
SWING
3
1
2
C
MODE
ON
H
POWER
FAN