Panasonic CW-XC145HU User Manual

1. Open the window. Mark a line on the center

of the window stool between the side
window stop moldings. 
Loosely attach the sill bracket to the support
bracket using the carriage bolt and the lock
nut. (See Fig. 5)

2. Attach the sill bracket to the window sill

using the screws (Type B).
Carefully place the cabinet on the window
stool and align the center mark on the
bottom front with the center line marked
window stool.(See Fig. 6)

3. Using the M-screw and the lock nut, attach

the support bracket to the cabinet track hole.
Use the first track hole after the sill bracket
on the outer edge of the window sill. Tighten
the carriage bolt and the lock nut. Be sure
the cabinet slants outward. (See Fig. 6)

BOTTOM PAN. 
The unit is designed to operate
with approximately 12.7 mm
(1/2") of water in bottom pan. 

4. Pull the bottom window sash down behind

the Top retainer bar until they meet.(See
Fig. 7)

NOTE: 1. Do not pull the window sash down so

tightly that the movement of Frame
curtain is restricted. Attach the
cabinet to the window stool by
driving the screws (Type B) through
the cabinet into window stool. (See
Fig. 8)

2. The cabinet should be installed with

a very slight tilt downward toward the
outside. 

Support

Bracket

Lock nut

Sill

Bracket

Carriage

Bolt

(Type M)

Window sash

Top retainer bar

Cabinet

Foam-PE

Frame curtain

Screw (Type B) 

Front Angle

Sash track

Foam-PE

Cabinet

Track hole

Support

Bracket

Carriage bolt

and lock nut 

Machine screw (Type D)  

and lock nut

Outer edge 

of window 

sill

Screw (Type B)

Sill bracket