Panasonic CW-XC145HU User Manual

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

■ 

• Make sure the air conditioner plug is pushed

completely into the outlet.

• Check the house fuse/circuit breaker box and

replace the fuse or reset the breaker.

• When power is restored, wait 3 minutes to restart the

air conditioner to prevent tripping of the compressor
overload.

• Press the RESET button located on the power cord plug.
• If the RESET button will not stay engaged,

discontinue use of the air conditioner and contact a
qualified service technician.

• Make sure there are no curtains, blinds, or furniture

blocking the front of the air conditioner.

• Set the TEMP Control to a lower number.

• Clean the filter at least every 2 weeks.

See the operating instructions section.

• When the air conditioner is first turned on 

you need to allow time for the room to cool down.

• Check for open furnace floor registers 

and cold air returns.

• Set the air conditioner's vent to the closed position.

• See Air Conditioner Freezing Up below.

• Set the mode control at High Fan or High Cool with

the high temperature.

• You may hear a pinging noise caused by water being picked up and thrown against the condenser

on rainy days or when the humidity is high. This design feature helps remove moisture and improve
efficiency.

• You may hear the thermostat click when the compressor cycles on and off.

• Water will collect in the base pan during high humidity or on rainy days. The water may overflow

and drip from the outdoor side of the unit.

• The fan may run even when the compressor does not.