Panasonic CW-XC145HU User Manual

The ventilation lever must be in the CLOSE position in order to maintain the
best cooling conditions.
When fresh air is necessary in the room, set the ventilation lever to the
OPEN position. 
The damper is opened and room air is drawn out.

The direction of air can be controlled wherever you want to cool by adjusting the
horizontal louver and the vertical louver.

In humid weather, excess water may cause the BASE PAN to overflow. To drain the water, remove the DRAIN
CAP and secure the DRAIN PIPE to the rear hole of the BASE PAN. Press the drain pipe into the hole by pushing
down and away from the fins to avoid injury. (See Fig. 1)

1. Remove the rubber plug and slide the chassis out

from the cabinet. (See Fig. 2)

2. Install the drain pan over the corner of the cabinet

where you removed the plug with 4 screws.
(See Fig. 3)

3. Connect the drain hose to the outlet located at the

bottom of the drain pan. You can purchase the drain
hose or tubing locally to satisfy your particular
needs. (Drain hose is not supplied). (See Fig. 3)

4. Select the most appropriate connection from among

the figures to the right (by considering the hole of the
unit) to fit drain pan to your own unit. (See Fig. 3)

5. Slide the chassis back into the cabinet. Reinstall the

cabinet screws. Secure the cabinet to chassis by
using screws. (See Fig. 4)

VENT

CLOSE

OPEN

Part A

Part B

Drain pipe

Drain cap

DRAIN HOSE
Inside diameter 17mm (5/8")

Wireless

R emote C

o ntrol

DRAIN
PAN

CABINET

SCREW

Remove the
rubber plug

Wirel

ess

R e m

o t e   C

o n t r

o l

NOTE: Before using the ventilation feature, and prior to installing the front

grille, pull down part 

until level with part  .

The vertical air direction is adjusted
by rotating the horizontal louver
forward or backward manually.

The horizontal air direction is adjusted by
rotating the vertical louver right or left manually
or by Remote Controller.