Panasonic CU-E9DKR User Manual

Operation Details

Auto, Heat, Cool, Dr y

Select the
desired
operation.

Set the
temperature.
(16°C~30°C)

Start the
operation.

HOW TO OPERATE

Supersonic air purifying device (super alleru-buster) operates

automatically while the air conditioner is switched on.

Powerful, Quiet and Ion operations could be activated in all

operation modes.

Press

button again to stop the operation.

AUTO - Automatic Operation

• Enables you to enjoy the cooling

effect at your preferred setting
temperature.

COOL - Cooling Operation

• Enables you to set the desired

temperature at low fan speed which
provides you with the dehumidifying
surroundings.

DRY - Soft Dry Operation

• The unit will automatically select

the operation mode according
to the setting, outdoor and room
temperature. During operation mode
selection, power indicator blinks.
For every 30 minutes, the operation
mode is reselected.

• Enables you to enjoy the warming

effect at your preferred setting
temperature.

• For cold air prevention, air might

not blow out immediately and
power indicator blinks when
operation starts.

• Also operates in defrost mode

(maximum 10 minutes) where by
the power indicator blinks. The
melted frost is drained at outdoor
unit and indoor fan is stopped.

HEAT - Heating Operation

AUTO

COOL

HEAT

DRY

Troubleshooting

The room has a peculiar odour.

This may be a damp smell emitted by the wall, carpet, furniture or

clothing in the room.

Air conditioner does not cool or heat effi ciently.

Ensure the temperature has been set correctly.

Ensure windows and doors have been closed properly.

Ensure fi lters are cleaned or replaced when necessary.

Ensure inlet and outlet vents of the units have not been obstructed.

To save electricity, close the curtains when using air conditioner to prevent sunlight and heat from coming in.

Hint

CS-E9DKRW CU-E9DKR / CS-E12DKRW CU-E12DKR