Panasonic CU-XE12EKE User Manual
10
CHANGE FILTER CLEANING
DEFAULT SETTING
■
Hint
• Manual fi lter cleaning is operable
by pressing
. For detail, see
manual fi lter cleaning page.
■
Setting
• To disable the fi lter cleaning
permanently, follow steps 1 to 3 as
shown below.
shown below.
Disable Filter Cleaning
Press and hold for more than
20 seconds. ON will blink on
the display.*
20 seconds. ON will blink on
the display.*
1
Press to select OFF.
2
Press to confi rm the setting.
CLEANING will disappears
from the display.
CLEANING will disappears
from the display.
3
• Auto and timer fi lter cleaning are no
longer valid.
• Select ON in step 2 above to
enable fi lter cleaning.
• As a default setting, fi lter cleaning will run automatically once the air conditioner unit is turned off.
Press and hold until you
hear 3 beeps (about 11
seconds).
hear 3 beeps (about 11
seconds).
1
1
Press once.
You will hear 1 beep.*
You will hear 1 beep.*
2
2
Press to select your desired fi lter cleaning setting:
4
4
Auto OFF/
ON button.
ON button.
Press 3 times until you
hear 3 continuous beeps.*
hear 3 continuous beeps.*
3
3
When you hear
Setting
1 beep
• Filter cleaning will run automatically after the air conditioner
operation stops (air conditioner is turned off using remote control).
• After the fi lter cleaning is completed, the air conditioner operation
will remain off.
2 beeps **
• Filter cleaning will run automatically before the air conditioner
operation starts (air conditioner is either turned on using remote
control or turned on by the air conditioner timer).
control or turned on by the air conditioner timer).
• After the fi lter cleaning is completed, the air conditioner operation
will start automatically.
3 beeps **
• Filter cleaning will run automatically before the air conditioner
operation starts (air conditioner is turned on using remote control).
• After the fi lter cleaning is completed, the air conditioner operation
will start automatically.
1 long beep
(default setting)
(default setting)
• Filter cleaning will run automatically after the air conditioner
operation stops (air conditioner is either turned off using remote
control or turned off by the air conditioner timer).
control or turned off by the air conditioner timer).
• After the fi lter cleaning is completed, the air conditioner operation
will remain off.
* Use a sharp end object to press this button.
** The setting is valid only if the following conditions are fulfi lled:
1. The air conditioner is turned off for at least 3 minutes.
2. The air conditioner has operated continuously for at least 2 hours in previous operation.