Panasonic CW-XC80HU User Manual

OPERATION

TEMP

TIMER

MODE

FAN SPEED

1

3

2

4

5

• To turn the air conditioner ON, push the button. 

To turn the air conditioner OFF, push the button
again.

• This button takes priority over any other buttons.

• When you first turn it on, the air conditioner is on

the High cool mode and the temp. at 72°F (22˚C).

• Every time you push this button, it will toggle

between COOL, FAN and DRY. 

- STOPPING OPERATION

• Every time you push this button,  when the air

conditioner is operating, timer is set as follows.
(1Hour 

→ 2Hours → 3Hours → 4Hours → 5Hours

→ 6Hours → 7Hours → 8Hours → 9Hours →
10Hours 

→ 11Hours → 12Hours → O)

• The Setting Temperature will be raised by 

2°F (1°C) 30 min. later and by 2°F (1°C) after
another 30 min.

- STARTING OPERATION

• Every time you push this button, when the air

conditioner is not operating, timer is set as follows.
(1Hour 

→ 2Hours → 3Hours → 4Hours → 5Hours

→ 6Hours → 7Hours → 8Hours → 9Hours →
10Hours 

→ 11Hours → 12Hours → O)

• Every time you push this button it is set as follows.

{High(F3) 

→ Low(F1) → Med(F2) → High(F3)...}.

• This button can automatically control the

temperature of the room. 
The temperature can be set within a range of 60°F
to 86°F by 2°F(16˚C to 30˚C by 1˚C). Select the
lower number for lower temperature of the room.

• When this unit is in dry mode, the fan rotates in

low speed. The fan stops when the compressor
stops cooling.
Approximately every 3 minutes the fan will turn on
and the unit checks the room air temperature to
set itself.

The Remote Controller will not function properly if strong light strikes the sensor window of the
air conditioner or if there are obstacles between the Remote Controller and the air conditioner.