Panasonic CU-E24EKR User Manual

■ 

Operation Details

AUTO, HEAT, COOL, DRY

COOL - Cooling Operation

•  Enjoy cool air at your desired 

temperature.

DRY - Soft Dry Operation

•  Keeps your environment 

dehumidified by running a very 

gentle cooling operation.

•  During soft dry operation, the 

indoor fan operates at low fan 

speed.

AUTO - Automatic Operation

•  Unit selects the operation mode 

according to temperature setting, 

outdoor and room temperature. 

•  The power indicator blinks during 

operation.

•  Operation mode is reselected 

every 30 minutes.

•  In heating mode, it takes a while 

for the unit to warm up. The 

power indicator blinks during this 

operation.

HEAT - Heating Operation

Troubleshooting

FAN

SPEED

AIR

SWING

AUTO

HEAT

COOL

DRY

ION

OFF/ON

TEMP

MODE

QUIET

AIR SWING

TIMER

ON

SET

OFF

CANCEL

AC

RC

RESET

SET CHECK CLOCK

1

3

2

POWERFUL

FAN SPEED

2

2

3

3

1

1

■ 

Hint

•  A temperature setting 1°C higher 

in cooling operation or 2°C lower in 

heating operation than the desired 

temperature equates to a 10% 

power saving.

●  Mist emerges from indoor unit.

►  Condensation effect due to cooling process.

●  Heating/Cooling operation does not work.

►  Ensure temperature is set correctly.

►  Make sure windows and doors are closed.

►  Make sure filters are cleaned and replaced.

►  Make sure inlet and outlet vents are cleared.

●  Water flowing sound during operations.

►  Cause by refrigerant flow inside the unit.

●  The power indicator blinks during the operation and 

the indoor fan is stopped.

►  The unit is in defrost mode, and the melted frost is drained from the 

outdoor unit.

●  Supersonic air purifying device (super alleru-buster) operates 

automatically once the unit is switched on.

● 

, 

and

operations are available in all modes.

●  Press

again to stop the operation.