Panasonic CS-E28FKR User Manual

AUTO 

HEAT 

FAN 
SPEED

AIR

SWING

COOL 

DRY 

TEMP 

AIR SWING 

FAN SPEED 

QUIET 

POWERFUL 

TIMER

ON

1

2

3

OFF

SET 

CANCEL 

MODE

OFF/ON

AC

RC

SET 

CLOCK

CHECK

RESET 

■

 

Hint

•  A temperature setting 1°C higher 

in cooling operation or 2°C lower in 
heating operation than the desired 
temperature equates to a 10% 
power saving.

AUTO, HEAT, COOL, DRY

●  Supersonic air purifying device operates automatically once 

the unit is switched on.

● 

POWERFUL 

and 

QUIET

operations are available in all modes. 

● Press 

OFF/ON

 again to stop the operation.

OFF/ON

2

2

MODE

1

1

4%-0

3

3

Troubleshooting

●  Mist emerges from indoor unit.

►  Condensation effect due to cooling process.

● 

Heating/Cooling operation does not work.

►  Ensure temperature is set correctly.
►  Make sure windows and doors are closed.
► Make sure fi lters are cleaned and replaced.
►  Make sure inlet and outlet vents are cleared.

● Water fl owing sound during operations.

► Cause by refrigerant fl ow inside the unit.

●  The power indicator blinks during the operation and 

the indoor fan is stopped.

►  The unit is in defrost mode, and the melted frost is drained from the 

outdoor unit.

■ 

Operation Details

COOL - Cooling Operation

•  Enjoy cool air at your desired 

temperature.

DRY - Soft Dry Operation

•  Keeps your environment 

dehumidifi ed by running a very 
gentle cooling operation.

•  During soft dry operation, the 

indoor fan operates at low fan 
speed.

AUTO - Automatic Operation

•  Unit selects the operation mode 

according to temperature setting, 
outdoor and room temperature. 

•  The power indicator blinks during 

operation.

•  Operation mode is reselected 

every 30 minutes.

•  In heating mode, it takes a while 

for the unit to warm up. The 
power indicator blinks during this 
operation.

HEAT - Heating Operation