Soleus Air PE3-12R-03 User Manual
OPERATING INSTRUCTIONS
CONTROL PANEL BUTTONS (Refer to the images on page 9)
1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER
button once more to turn the unit off.
2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Auto mode,
Air Conditioner, Dehumidifier, and Fan only.
3) Fan Speed Control - Press the FAN SPEED Button to cycle through the different fan speeds: High,
Medium, and low. The fan speed can be visually distinguished by the speed of the digital air segments
progressing out from the windmill fan image on the Multi-color display. There is an additional auto speed
setting that is enabled in only cooling mode. This speed is next setting after low when pressing the speed
control button. The speeds will cycle through in this order: High, Medium, Low, Auto. Each change in
speed will be associated with a “beep” sound from the unit.
progressing out from the windmill fan image on the Multi-color display. There is an additional auto speed
setting that is enabled in only cooling mode. This speed is next setting after low when pressing the speed
control button. The speeds will cycle through in this order: High, Medium, Low, Auto. Each change in
speed will be associated with a “beep” sound from the unit.
4)
Temperature
- Select the desired temperature by pressing either ▼ or ▲
key when using the unit in
cooling mode. The temperature indicator flashes to display the desired temperature setting. After the tem-
perature is set, the unit will display this temperature setting until it is changed by the user. The Multi-color
display shows temperature in Celsius or Fahrenheit. Press the ▼ and ▲ simultaneously will change the
temperature select between °C and °F
perature is set, the unit will display this temperature setting until it is changed by the user. The Multi-color
display shows temperature in Celsius or Fahrenheit. Press the ▼ and ▲ simultaneously will change the
temperature select between °C and °F
.
5)
SWING
- To turn on the exclusive WAVEFLO® oscillation, press the SWING button on the control
panel. Once you press SWING, the louvers on the unit will oscillate up and down. To change the horizon-
tal direction of the air flow manually adjust the internal horizontal louvers left or right.
tal direction of the air flow manually adjust the internal horizontal louvers left or right.
6)
Timer
- To program the timer, press the TIMER ON button until the display shows a flashing “
”.
Press the ▲ or ▼ buttons to change the timer to the desired time for the unit to automatically turn on.
Press the TIMER OFF button and the display on the unit will flash “
”. Press the ▲ or ▼
buttons to change the timer to the desired time for the unit to automatically turn off. The TIMER OFF
indicator will flash for 3 seconds to activate the times you programmed.
indicator will flash for 3 seconds to activate the times you programmed.
NOTE: The timer will also remember your settings when it is set. If you set the timer while in Air Condition-
ing mode, the timer will automatically turn the unit on and off in air conditioning mode according to the de-
sired programmed times. The timer will also remember the temperature settings, fan speed, and oscillation set-
ting. The timer works when the unit is in Air Conditioner mode, Dehumidifier mode, Fan mode, and Auto
mode.
ing mode, the timer will automatically turn the unit on and off in air conditioning mode according to the de-
sired programmed times. The timer will also remember the temperature settings, fan speed, and oscillation set-
ting. The timer works when the unit is in Air Conditioner mode, Dehumidifier mode, Fan mode, and Auto
mode.
OPERATING THE UNIT USING THE CONTROL PANEL
Air Conditioner Mode
1) Install the exhaust hoses and window kit properly (see pages 6, 7 & 8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER button on the control panel.
Air Conditioner Mode
1) Install the exhaust hoses and window kit properly (see pages 6, 7 & 8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER button on the control panel.
4) Press the Mode button until the “
” icon appears on the Multi-color display
11