MASTER LOCK B100 User Manual

100743

8

Continued

Fuel tank

Flush every 150-200 hours

See Storage above.

  of operation or as needed.

Air output and

Replace every 500 hours of

See Air Output, Air Intake,

lint filters

  operation or once a year.

   and Lint Filters, page 14.

Air intake

Wash and dry with soap and

See Air Output, Air Intake,

filter

  water every 500 hours of

  and Lint Filters, page 14.

  operation or as needed.

Fuel filter

Clean twice a heating season

See Fuel Filter, pages 10

   or as needed.

   and 11.

1. Unplug power cord from outlet.

1. Wait 2 minutes after stopping heater.
2. Repeat steps under To Start Heater, page 7.

!

1. Drain fuel tank.

Note:

Some models have drain plug on underside of fuel tank. If so, remove

drain plug to drain all fuel. If heater does not have drain plug, drain fuel
through fuel cap opening. Be sure all fuel is removed.

2. Replace drain plug if used.
3. Add one gallon (4 liters) of clean kerosene or paraffin to fuel tank.
4. Attach fuel cap.
5. Move heater forwards and backwards to stir fuel.
6. Remove fuel cap or drain plug and drain fuel tank. Be sure all fuel is removed.
7. Replace fuel cap or drain plug. Properly dispose of old and dirty fuel.
8. Store heater in dry place. Make sure storage place is free of dust and corrosive

fumes.

IMPORTANT:

 Do not store kerosene or paraffin over summer months for use

during next heating season. Using old fuel could damage heater.

Flame-Out
Control
Reset Button
(Fan Guard
Removed)