Lg Electronics LT1430CR User Manual

Power

Temp

Fan Speed

Timer

Mode

• To turn the air conditioner ON, push this button. 

To turn the air conditioner OFF, push the button again.

• This button takes priority over any other button.
• When you first turn it on, the unit is in cool mode, High fan speed, 

Temperature setting at 72

°F.

• Auto Restart

In the event at a power failure, the unit will run at the previous setting once 
power returns.

• Use this button to automatically control the temperature of the room. 

The temperature can be set within a range of 60

°F to 86°F by 

increments of 1

°F.

• The setting appears in the display.

• Every time you push this button it advances the setting as follows: 

(High 

→ Low → Med → High)

- SHUT-OFF TIME

• You will usually use shut-off time while you sleep.
• If unit is running, use Timer to set number of hours until shut-off.
• For your sleeping comfort, once Time is set, the Temperature setting will 

raise 2

°F after 30 min, and once again after another 30 min.

• Push Timer button to advance setting from 1Hour 

→ 

2Hours 

→ 

... 

→ 

12Hours maximum.

- START TIME

• If unit is off, use Timer to set of hours before unit starts.
• Push Timer button to advance setting from 1Hour 

→ 

2Hours 

→ 

... 

→ 

12Hours maximum.

- Push this button to shift mode of operation from COOL 

→ 

ENERGY SAVER 

→ 

FAN.

- COOL:

• Fan runs continually for normal cooling operation.

- ENERGY SAVER:

• The fan stops when the compressor stops cooling. Approximately every 3 minutes the fan will turn on 

and the unit will check the room air temperature to determine if cooling is needed.

- FAN:

• Fan-only operation.