Lg Electronics LW1800PRZ3 User Manual

1. Remove the control box. (Refer to section 3)

2. Open the top cover from the control box.

(See Figure 25)

3. Pull out the capacitor from the control box.

4. Disconnect all the leads of capacitor terminals.

5. Re-install the components by referring to the

removal procedure, above. 

1. Remove the control box. (Refer to section 3)

2. Open the top cover from the control box.

(Refer to section 9)

3. Disconnect the front panel from the control box.

(See Figure 26)

4. Disconnect two leads from the capacitor and

relay.

5. Pull out the power cord. 

6. Re-install the component by referring to the

above removal procedure, above.
(Use only one ground-marked hole for ground
connection.)

7. If the supply cord of this appliance is damaged, it

must be replaced by the special cord. 
(The special cord means the cord which has the
same specification marked on the supply cord
attached at the unit.)