Lg Electronics BG-81A User Manual

—

9—

1. Remove the control box. (Refer to section 2.1.3)
2. Unfold the control box. (Refer to section 2.3.3)
3. Disconnect the grounding screw from the Base

pan.

4. Disconnect 2 receptacles.
5. Remove a screw which fastens the clip cord.
6. Pull the power cord. (See Fig. 13)
7. Re-install the components by referring to the

removal procedure, above.
(Use only one ground-marked hole,     , for ground
connection.)

8. If the supply cord of this appliance is damaged, it

must be replaced with the factory-authorized and
specified cord. 

1. Remove the control box. (Refer to section 2.1.3)
2. Unfold the control box. (Refer to section 2.3.3)
3. Disconnect all the leads of thermistor terminals.
4. Remove the thermistor. (See Fig. 14)
5. Re-install the components by referring to the

removal procedures, above.