Dometic 379 CHASSIS User Manual

Page of 12
ENGLISH
5
Peterbilt 379 Installation Guidelines
LOCATING THE COMPONENTS
The Dometic remote auxiliary air conditioning system 
consists  of  two  basic  components:  an  outside 
condensing unit, which contains the condenser and 
an  exhaust  fan,  and  an  inside  unit,  which  contains 
the  compressor,  heater,  evaporator  and  blower 
(CHEB). The two units are connected by precharged  
refrigerant lines with quick-connect fittings. 
Determine  where  best  to  install  the  CHEB  (Fig.  1). 
Refer  to  the  manual  that  came  with  the  CHEB  for 
more information. Keep in mind that the driver’s side 
luggage box is probably one of the most used storage 
areas,  so  for  your  ongoing  storage  convenience, 
consider  the  passenger's  side  luggage  box,  then 
the  center  storage  area,  and  lastly  the  driver’s  side 
box for CHEB installation. Use the CHEB template to 
determine the best place to mount the unit.
The Dometic condenser may be installed either under 
or behind the sleeper (Figs. 2a-2b).
IMPORTANT! 
Refer  to  the  Dometic  installation  manual 
for details on installing and connecting the 
CHEB and condensing unit.
Figure 1 - CHEB installed in luggage compartment
Figure 2a - Condensing unit mounted under truck
Figure 2b - Condensing unit mounted on back of sleeper