DeLonghi PACT110P User Manual
![DeLonghi](https://files.manualsbrain.com/attachments/c56225e8f54122533ed7b2e6f10e7121c8ac4bec/common/fit/150/50/8b4ce76d33772316f1ffe3b2219a73ac109f4fc02ccf98a23854dcf065b8/brand_logo.jpeg)
6
I n s t a l l i n g y o u r p o r t a b l e
a i r - c o n d i t i o n e r
SEMI-PERMANENT INSTALLATION
If required, the Pinguino can also be installed
semi-permanently (Fig. E and E1).
semi-permanently (Fig. E and E1).
•
Fit the flange accessory (11) provided in
the hole.
the hole.
•
Fit the hose (12/19) in the housing at the
back of the appliance (fig. A / A1 page 5).
back of the appliance (fig. A / A1 page 5).
•
Fit the end of the hose (12/19) to the flan-
ge (11) as shown in fig. G.
ge (11) as shown in fig. G.
Proceed as follows:
•
•
Drill a hole in an outside wall or through a
window pane.
Respect the height and dimensions of the
hole (s) given in figures F and G.
window pane.
Respect the height and dimensions of the
hole (s) given in figures F and G.
30 cm
11.8 in
ches
30
cm
11,8 inches
MAX100 cm
MIN 35 cm
MAX 39.37 inches
MIN 13.77 inches
When the hose (12/19) is not fitted, the drilled
hole can be closed with the flange cap (11).
hole can be closed with the flange cap (11).
NOTE.
When installing the air conditioning unit semi-
permanently, you should leave a door slightly
open as little as 1/2 inches (1 cm) to gua-
rantee correct ventilation.
When installing the air conditioning unit semi-
permanently, you should leave a door slightly
open as little as 1/2 inches (1 cm) to gua-
rantee correct ventilation.
G
Keep the air hoses as short and free of
curves as possible to avoid constrictions.
curves as possible to avoid constrictions.
4.17 inc
hes (106 mm)
in the window
pane
pane
in the wall: you are
recommended to
insulate the sec-
tion of wall using
suitable insulation.
recommended to
insulate the sec-
tion of wall using
suitable insulation.
in the woo-
den kick-
board of a
French win-
dow
den kick-
board of a
French win-
dow
F
30 cm
11.8
inches
30
cm
11,8 inches
E1
E
Double window
Open the double window slightly and posi-
tion the window outlet (13) .
Use the suction pads (14) or (22) (depending on
model) to hold the two parts of the window
together (fig. D and D1).
tion the window outlet (13) .
Use the suction pads (14) or (22) (depending on
model) to hold the two parts of the window
together (fig. D and D1).
D1
1
2
D