GE AS_06 User Manual

■ 

To ensure proper operation, aim the 
remote control at the signal receiver 
on the air conditioner.

■ 

The remote control signal has a range of up 
to 21 feet.

■ 

Make sure nothing is between the air 
conditioner and the remote control 
that could block the signal.

■ 

Make sure batteries are fresh and installed
correctly–see the Care and Cleaning section.

Features and appearance will vary.

5

Controls

Turns air conditioner on and off.

Shows the set temperature or time remaining
on timer.

Use to set the air conditioner to COOL or 
FAN mode. 

▲ 

▼

Use to set temperature when in COOL mode or
to set the time when using the timer feature.

Use to set the fan speed at LOW, MED or HIGH.

Turn on to provide continuous side-to-side 
air circulation.

For fixed side-to-side air direction, turn ON
until the desired air direction is obtained,
then turn it OFF.

Controls the fan.

ON–The fan and compressor cycle on and off.

This results in wider variations of room
temperature and humidity. Normally
used when the room is unoccupied.
Note: The fan will continue to run for a short
time after the compressor cycles off.

OFF–The fan runs all the time, while the

compressor cycles on and off.

This switch must be set at OFF in order to use the fan
settings (on the mode control).

Turn on and use the INCREASE ▲ / 
DECREASE ▼ pads to set the number of hours
you want the air conditioner to run before
turning off automatically. You can set the
timer to run for up to 24 hours. To cancel the
timer, press the TIMER pad until the display
time disappears.