Goldstar LWJ0611PCG User Manual

—5—

Remove the cover from the back of the
remote controller

Insert two batteries.

• Be sure that the (+) and (-)  directions

are correct.

• Be sure that both batteries are new.

Re-attach the cover.

• Do not use rechargeable batteries. Such bat-

teries 
differ from standard dry cells in shape, dimen-
sions, and performance.

• Remove the batteries from the remote con-

troller if the air conditioner is not going to be
used for an extended length of time.

Auto

Swing

Power

Temp

Fan Speed

Timer

Mode

Energy

Saver

The fan stops when the compressor stops cooling.
• Approximately every 3 minutes the fan will turn on and
  check the room air to determine if cooling is needed.

• Everytime you push this button it is set as follows.
  (High(F2)    Low(F1)    High(F2)...)

• To turn the Set ON, push the button. To turn the Set OFF, push the button again.
• This button takes priority over any other buttons.
• When you first turn it on, the Set is on the High cool mode and the temp. at 72

°

F(22

°

C).

- STOPPING OPERATION
• Everytime you push this button,  when the set is operating,
  timer is set as follows. 
  (1Hour    2Hours    3Hours    4Hours    5Hours    6Hours
  7Hours    8Hours    9Hours    10Hours    11Hours    12Hours    Cancel)
• The Setting Temperature will be raised by 2

°

F(1

°

C) 30min. 

  later and by 2

°

F(1

°

C) after another 30 min.

- STARTING OPERATION
• Everytime you push this button, when the set is
  not operating, timer is set as follow. 
  (1Hour    2Hours    3Hours    4Hours    5Hours    6Hours
  7Hours    8Hours    9Hours    10Hours    11Hours    12Hours    Cancel)

• This button can automatically control the temperature of the room. 

The temperature can be set within a range of 60

°

F(16

°

C) to 

86

°

F(30

°

C) by 1

°

F(1

°

C). 

Select the lower number for lower temperature of the room.