Goldstar WM-6011 User Manual

—4—

Dry

Fan

Cool

- STOPPING OPERATION
• Everytime you push this button,  when the unit is operating,
  timer is set as follows. 
  (1Hour    2Hours    3Hours    4Hours    5Hours    6Hours
  7Hours    8Hours    9Hours    10Hours    11Hours    12Hours    Cancel)
• The Setting Temperature will be raised by 2

°

F(1

°

C) 30min. later

  and by 2

°

F(1

°

C) after another 30 min.

- STARTING OPERATION
• Everytime you push this button, when the unit is
  not operating, timer is set as follow. 
  (1Hour    2Hours    3Hours    4Hours    5Hours    6Hours
  7Hours    8Hours    9Hours    10Hours    11Hours    12Hours    Cancel)

• Everytime you push this button, it will toggle between
  COOL, FAN and DRY.

• To turn the unit ON, push the button. To turn the unit OFF,
  push the button again.
• This button takes priority over any other buttons.
• When you first turn it on, the unit is on the High cool mode
  and the temp. at 72

°

F(22

°

C).

• This button can automatically control the temperature
  of the room. The temperature can be set within a range of
  60

°

F(16

°

C) to 86

°

F(30

°

C) by 1

°

F(1

°

C).

  Select the lower number for lower temperature of the room.

• Everytime you push this button it is set as follows.
  {High(F2)

Low(F1)

High(F2)...}.

The fan stops when the compressor stops cooling.
• Approximately every 3 minutes the fan will turn on and
  check the room air to determine if cooling is needed.