IMC Networks iMcV-FiberLinX-II 856-14063 User Manual
Product codes
856-14063
www.imcnetworks.com
800-624-1070
www.mediaconverter.com
Full-Featured iMcV-FiberLinX-II
EtherType Control
The iMcV-FiberLinX-II allows for the ability of setting a
different EtherType on the extra tag in order to uniquely
identify extra-tagged traffic. The available EtherType codes
are 8100, 9100, and 9200.
Dedicated Management Port
Dedicated Management Port
The EXT MGMT port on the iMcV-FiberLinX-II provides the
ability to physically isolate the management domain from
the data domain, allowing users to manage edge devices
and beyond while protecting the management domain from
unwanted access.
Troubleshooting Features
Troubleshooting Features
FiberAlert, LinkLoss and 802.3ah OAM (Operations,
Administration and Maintenance) assist in diagnosing
potential problems on fiber optic networks. Additionally,
RMON and IFSTAT statistics are available.
Last Gasp Trap
The Last Gasp Trap is an SNMP feature that allows the
module to notify the network when the module has lost
power.
Loopback Testing
Loopback Testing
Loops back all frames arriving on the fiber port (except
for the device’s management traffic). When in Loopback
mode, FiberLinX-II drops the link on the twisted pair port.
Supports the Unified Management Agent (UMA)
Supports the Unified Management Agent (UMA)
The Unified Management Agent (UMA) allows users to
manage all FiberLinX-II modules installed in an IMC
Networks iMediaChassis (and any connected remote
modules) with a single IP address from a central location,
conserving precious IP addresses. Additionally, UMA allows
users to centrally manage and administer firmware upgrades
over multiple devices, saving time.
From a central location, network operators are able to receive real-time device and traffic statistics on the remote CPE or
other devices connected to the remote management port, allocate bandwidth, turn services on or off, initiate loopback
testing, change customer VLAN settings and adjust QoS policies assigned to different traffic types.
Offering unparalleled flexibility, the iMcV-FiberLinX-II supports multiple fiber types including multi-mode and single-mode as
well as single-strand fiber which can effectively double the capacity of installed fiber.
Every iMcV-FiberLinX-II includes the following ports:
•
One 10/100 twisted pair (RJ45) data port
•
One additional 10/100 twisted pair port (EXT MGMT) for management (can also function as a serial port), and
Available configurations include:
•
One 100 Mbps Fiber data port, or
•
One additional 10/100 twisted pair (RJ45) data port, or
•
One SFP port (requires one SFP/155-ED Module), or
•
Two SFP ports (requires two SFP/155-ED Modules)
The DATA port on the iMcV-iberLinX-II provides Auto Negotiation, automatic crossover detection, full or half duplex and
Selective Advertising. Ports also feature Flow Control in Full Duplex Mode (FDX) and Back Pressure Flow Control.
Flexibility
iMcV-FiberLinX-II
SNMP Management Made Easy
The iMcV-FiberLinX-II features an SNMP management agent for monitoring the status and activity on copper and fiber ports
at the remote end. Perform initial setup of the unit and modifications in the field via: iView² SNMP application, Telnet/TFTP,
or local serial connection.
• Enable features and change configuration settings from central office
• Remote upgrades via Telnet/TFTP, serial port or iView²
• Monitor both units and the fiber in between
• Receive real-time monitoring and statistics
• Change bandwidth “on-the-fly” up to 100 Mbps in 32 kb increments
• Create a secure management domain to isolate management domain
• Remote upgrades via Telnet/TFTP, serial port or iView²
• Monitor both units and the fiber in between
• Receive real-time monitoring and statistics
• Change bandwidth “on-the-fly” up to 100 Mbps in 32 kb increments
• Create a secure management domain to isolate management domain
broadcasts from TX Data ports on both units
• User-definable unit/port descriptions and information