Toshiba RAV-SM802UT-E User Manual

– 128 –

Electrical parts cover

Screws 
(Fixing electrical parts box and main unit)

Electrical parts box

Claw (Reverse side)

Fixing claw (Main unit)

Multi blade fan

Fan case

Screws (Fixing fan case cover)

Fan case cover

Set screw

Fixing hole (Fan assembly)

Hexagon head screws 
(Fixing fan assembly and main unit)

Screws 
(Fixing electrical parts cover and box)

1  -2
1  -3

1  -4
1  -5

2  -3

2  -4

2  -5
2  -6

Be sure to turn off the power supply or circuit breaker before disassembling work



‚

Electrical parts
box

Multi blade fan

1. Remove the air filter.
2. Remove the set screws (2 positions) of

the electrical parts cover.

3. Remove the electrical parts cover.
4. Remove the set screws (2 positions) of

the electrical parts box.

5. Remove the electrical parts box.

The electrical parts box is fixed to the
main unit with claws at the right side.
Lift up it once and pull toward you.
Then claws come off.

In this time, remove connectors of TA sensor,
TC sensor and TCJ sensor if necessary.

1. Remove the air filter.
2. Remove the connector of the fan motor

P.C. board.

3. Remove the hexagon head screw (562: 2,

802, 1102, 1402 : 3 positions) of fixing fan
assembly and main unit.

4. Remove the fan assembly from main unit.

The fan assembly is fixed to the main unit
with claws (3 positions) at the upper side.
Lift up it once and pull toward rear side.
Then claws come off.

5. Remove the set screws (4 positions) of

fixing fan case and fan cover.

6. Remove the fan cover.
7. Loosen the sets crew of the Multi blade

fan using hexagon wrench.

8. Pull the Multi blade fan towered fan case

side.
Then fans come off.