Toshiba RAV-SM802UT-E User Manual

– 136 –

For single-phase type models, 
also take off this screw

Motor support

Front cabinet

Front cabinet (Left side)

Slit

Claw

Cord clamp

Slit

Hook

Front cabinet

Lower

slit

Concavity at 
bottom plate

‚

Front cabinet

1) Perform work of item 1 of 



.

2) Remove screws (ST1T Ø4 × 10L, 2 pcs.)

of the front cabinet and the inverter cover.

3) Take off screws of the front cabinet and

the bottom plate. (ST1T Ø4 × 10L 3 pcs.)

4) Take off screws of the front cabinet and

the motor support.
(ST1T Ø4 × 10L, 2 pcs.)
• The left side of the front side if made to

insert to the rear cabinet, so remove it
pulling upward.

1) Insert hook at the left side of the front side

into the rear cabinet.

2) Hook the lower part at the right side of the

front to concavity of the bottom plate.
Insert the hook of the rear cabinet into the
slit of the front cabinet.

3) Attach the removed screws to the original

positions.