Toshiba RAV-SM802UT-E User Manual

– 143 –

Side cabinet

Inverter

Fin guard

End plate of the 
heat exchanger

Discharge port

Valve support plate

Side cabinet

Inverter

Side cabinet

Cabling panel 
(Rear)

Valve support 
plate

‚

ƒ

Discharge port
cabinet

Side cabinet

1) Perform work of item 1 of 



.

2) Take off screws (ST1T Ø4 × 10L, 3 pcs.)

of discharge port cabinet for the partition
plate.

3) Take off screws (ST1T Ø4 × 10L, 2 pcs.)

of discharge port cabinet for the bottom
plate.

4) Take off screw (ST1T Ø4 × 10L, 1 pc.) of

discharge port cabinet for the heat
exchanger.

5) Take off screws (ST1T Ø4 × 10L, 2 pcs.)

of discharge port cabinet for the fin guard.

1) Put the upper left side of the discharge

port cabinet on the end plate of the heat
exchanger, and then fix it with screw.
(ST1T Ø4 × 10L, 1 pc.)

2) Attach the removed screws to the original

positions.

1) Perform work of item 1 of 



.

2) Remove screw fixing the inverter and the

side cabinet. (ST1T Ø4 × 10, 1 pc.)

3) Remove screws of the side cabinet and

the valve support plate.
(ST1T Ø4 × 10, 2 pcs.)

4) Remove screw of the side cabinet and the

cabling panel (Rear).
(ST1T Ø4 × 10, 1 pc.)

5) Remove screw of the side cabinet and the

bottom plate. (ST1T Ø4 × 10, 1 pc.)

6) Remove screw of the side cabinet and the

fin guard (Heat exchanger).
(ST1T Ø4 × 10, 2 pcs.)