Toshiba RAV-SM802UT-E User Manual

– 151 –

Front panel

Roof plate



Common
procedure

Before works, put on gloves, otherwise an
injury may be caused by parts, etc.

1) Stop operation of the air conditioner, and

turn off switch of the breaker.

2) Remove the front panel.

(ST1T Ø4 × 10, 3 pcs.)
• After removing the screws, remove the

front panel while drawing it downward.

3) Remove the power cable and the indoor/

outdoor connecting cable from cord clamp
and terminal.

4) Remove the roof plate.

(ST1T Ø4 × 10, 6 pcs.)

1) Mount the roof plate.

(ST1T Ø4 × 10, 6 pcs.)

2) Connect the power cable and the indoor/

outdoor connecting cable to terminal, and
then fix them with cord clamp.

Be sure to fix the power cable and the
indoor/outdoor connecting cable with
bundling band on the market along the
inter-unit cable so that they do not come
to contact with the compressor, the valve
and the cable at gas side, and the dis-
charge pipe.

3) Attach the front panel.

(ST1T Ø4 × 10, 3 pcs.)