Toshiba RAV-SM802UT-E User Manual

– 158 –

Air-outlet 
cabinet

Bell-mouth

Bell-mouth

Air-outlet cabinet

Minus screwdriver

Square holes (3 positions)

Bell-mouth

Hooks (3 positions)

Hanging hook

Air-outlet cabinet

Fan guard

Screws 
(2 pcs)
Remove

Š

Fan guard

1) Perform the works in 1 of 



 and in 1 of 

‚

.

To prevent damage on the products, treat
component on a corrugated paper, cloth,
etc.

2) Remove the air-outlet cabinet, and then

put down it directing the fan guard side
downward.

3) Take off screws fixing the bell-mouth.

(ST1T Ø4 × 10, 2 pcs)

4) Remove the bell-mouth.
5) Take off screws fixing the fan guard.

(ST1T Ø4 × 10, 2 pcs)

6) Remove hanging hook of the fan guard by

pushing with a minus screwdriver.

1) Insert the extrusion at the upper side of

the fan guard into the square hole of the
air-outlet cabinet, and then insert the
hanging hook. Fix the hanging hooks
(5 positions) by pushing with hands.

Check that all the hanging hooks are fixed
to the specified positions.

2) After attachment, fix it with screws.

(ST1T Ø4 × 10, 2 pcs)

3) Mount the bell-mouth by hanging hooks

(3 positions) at upper side of the bell-
mouth to the square holes of the air-outlet
cabinet.

4) After attachment, fix it with screws.

(ST1T Ø4 × 10, 2 pcs)

• The size (color) of the bell-mouth at

upper side differs from that at lower side.
(Only for RAV-SP1102AT-E)

Upper side: Black
Lower side: Gray

Upper side: Black
Lower side: Black