Electrolux 583397 User Manual

62.9693.01

Page 8

the cooking time appears on the display (AD).

•

The program-linked cooking process is switched off by 

pressing the HACCP button (C). The appliance is then 

switched off according to 5.5.

A separate set of operating instructions contains information 

on the programming, analysing, logging and documenting of 

cooking processes using an external computer.

Altering the nominal values while working
All the nominal values programmed in originally can be easily 

altered during the working process by setting the buttons for 

temperature (T), for the cooking time (D) and for the starting 

time (Z) to the new values. When the buttons are turned, the 

nominal value will appear flashing on the relevant display. If 

the nominal value is not altered for a few seconds, the display 

reverts to the actual value.

Altering the cooking programmes while working
Switching off the button (TT) will interrupt the heating/cooking 

process. Switching off the cooking time button (DT) reverts to 

continuous cooking. Switching off the starting time button (ZT) 

deletes the programmed-in starting time. The appliance can be 

started manually.

MECHANICAL TILTING
The boiling pan is tilted with the help of an electric motor. It 

only works when the power isolator (H) (only available as an 

option) and the control switch (S) are switched on by turning 

from position 0 to I.
Lamp (LS) will light up.
Tilting at variable speed by turning the tilting knob (K):
Emptying the pan turn to the right
Tilting back turn to the left
Turning the knob further will accelerate the tilting function.
.

Tilting is only to be activated with lid fully open and with the 

swivel outlet of the water mixing unit in the correct position 

(precisely towards the front) and where no object is present 

under the appliance in the tilting zone. The boiling pan is tilted 

down by turning tilting switch clockwise (to the right) and tilted 

up by turning it anticlockwise (to the left). Tilting at variable 

speed will only take place as long as the tilting switch (K) is 

held in the tilting position. On being released, the switch 

returns to the neutral, centre position and due to the drive self-

locking, the boiling pan immediately comes to rest, whatever 

the position and filling level. The tilting motor is automatically 

switched off in the extreme positions of the boiling pan; the 

horizontal and fully tilted positions, so any further actuation of 

the tilting switch (K) has no effect.
The heating can no longer be operated with even the smallest 

degree of tilt from the horizontal.
Select the rate of tilting so that the produce is discharged in the 

region of the pouring lip. This is easy to do by varying the tilting 

speed. Avoid spillage of the contents over the rim of the boiling 

pan.

The appliance is shut down by turning the power isolator (H) 

(available as an option) as well as the control switch (S) to 

zero. All lights will go out when this is done.
In the case of faults, the appliance must also be disconnected 

from all supply connections (mains supply, gas)

The loss of mains electricity while a cooking pan is being used 

can result in cooking being halted or interrupted. Cooking staff 

are then required to make an additional intervention in the con-

trols or to monitor further processing.

K

 Tilting knob

Power failure when:

The measure to be imple-

mented to restart the cooking 

process after the mains sup-

ply has been restored

The cooking process is taking 

place

Press the key (TT)

The cooking process has 

been programmed with a 

starting time although this has 

not yet expired

After the mains supply has 

been restored, the starting 

time comes to an end and the 

heating process starts auto-

matically without any interven-

tion in the controls