Trendnet TEW-AI86DB User Manual

English

Antenna Base Mounting Methods & Configuration

PLEASE READ THE FOLLOWING INSTALLATION

STEPS BEFORE DRILLING HOLES IN THE WALL.

After removing the bottom cover from its seating, remove the
metal weight plate from the ceiling clips to expose the screw holes.

Press Tab

Lift Cover

Remove weight plate

Select location

Place

base template

Mark screw

position

WARNING:

Please make sure that the AP / Client device

can reach your selected antenna position (Antenna Cable is 1
meter / 3 feet)

After you have marked the wall for the appropriate drilling sites, re-
assemble the antenna stand without the metal weight. The clips
should not protrude.

In order to decrease the weight and increase the

magnetic power, it is highly recommended that the metal

plate be removed before installing antenna onto ceiling,

partition, or any metal surface.