Genie GS-1932 User Manual

Operator's Manual

Third Edition • Second Printing

Part No. 1000032

GS-1530 • GS-1532 • GS-1930 • GS-1932

19

FUNCTION TESTS

33 Move the drive control handle in the direction

indicated by the blue arrow, then move the drive
control handle in the direction indicated by the
yellow arrow.

Result: The drive function should not work in

either direction.

34 Lower the platform and remove both pieces of

wood.

35 Press the lift function select button.

36 Press and hold the function enable switch.

Raise the platform approximately 1.2 m from the
ground.

Result: The pothole guards should deploy.

37 Press the drive function select switch.

38 Press and hold the function enable switch.

Slowly move the control handle to the full drive
position.

Result: The maximum achievable drive speed

with the platform raised should not exceed 20
cm/s.

If the drive speed with the platform raised exceeds
20 cm/s, immediately tag and remove the machine
from service.

Note: The pothole guards should automatically
deploy when the platform is raised. The pothole
guards activate another limit switch which allows
the machine to continue to function. If the pothole
guards do not deploy, an alarm sounds and the
machine will not drive.

39 Raise the platform.

Result: When the platform is raised 1.2 m from

the ground, the pothole guards should deploy.

40 Press on the pothole guards on one side, and

then the other.

Result: The pothole guards should not move.

41 Lower the platform.

Result: The pothole guards should return to the

stowed position.

42 Place a 2x4 or similar piece of wood under a

pothole guard. Raise the platform.

Result: Before the platform is raised 2.1 m from

the ground, an alarm should sound and the drive
function should not work.

43 Lower the platform and remove the 2x4.