Heartland 2603 User Manual

7

Remove machine screws 

from the top (2 each side).

Remove screws and washers 

from top back flange of top, 2 

places on Sweetheart and 3 

on Oval

Cabinet Bracket

Machine

Screw

Remember when working with the cabinet it is top heavy. Use your hand to support it during installation. Remove the cabinet 

assembly from the top of the stove. Lift the cabinet assembly by the bracket area that is circled and set on the floor or a table top.

Unwrap the cabinet assembly.

Remove the washers and screws from the rear edge of the stove top. (2 places on sweetheart or 3 places on Oval. Also remove the 

4 machine screws from the top of the stove top.

With a helper lift the cabinet assembly (by the circled bracket area and supporting the top of the cabinet) and place the cabinet into 

position on the stove top (see diagram above). Line up the bracket holes with the 4 holes in the stove top while a helper supports

the cabinet.

Secure the cabinet to the stove top with the 4 machine screws and the 2 or 3 screws and washers. 

Tool Rack- fasten 

to rear of cabinet 

using screws and 

nuts provided.