Regency U37-LP1 User Manual
24
U37-1 Regency
®
ULTIMATE Rear Vent Direct Vent Freestanding Gas Stove
WIRING DIAGRAMS
This heater does not require a 120V A.C. sup-
ply for operation. In case of a power failure, the
burner switch and the optional remote control/
thermostat will continue to operate. However,
a 120V A.C. power supply is needed for the
fan/blower operation.
ply for operation. In case of a power failure, the
burner switch and the optional remote control/
thermostat will continue to operate. However,
a 120V A.C. power supply is needed for the
fan/blower operation.
Caution: Ensure that the wires do
not touch any hot surfaces and are
away from sharp edges.
not touch any hot surfaces and are
away from sharp edges.
INSTALLATION
CAUTION: Label all wires prior
to disconnection when servicing
controls. Wiring errors can cause
improper and dangerous opera-
to disconnection when servicing
controls. Wiring errors can cause
improper and dangerous opera-
WARNING: Electrical Grounding Instructions
This appliance is equipped with a three pronged (grounding) plug for your protection against shock hazard and should
be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from
this plug.
be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from
this plug.
For
NATURAL GAS
Units and Units
NOT
Equipped with DC Spark Boxes