Quadra-Fire MTVERNON-AE-CSB User Manual
R
September 1, 2008
7034-106E
Page 15
Mt. Vernon Pellet Stove (AE)
We recommend a minimum of 60 inches
(1524mm) vertical, however above the eave
is preferred.
(1524mm) vertical, however above the eave
is preferred.
All three installations are approved for mobile
home installations. Must use 3 or 4 inch (76
to 102mm) “L” or “PL” Listed pellet venting or
Listed double wall pipe and Quadra-Fire Out-
side Air Kit in mobile homes. Single wall pipe
is approved for residential installations only.
home installations. Must use 3 or 4 inch (76
to 102mm) “L” or “PL” Listed pellet venting or
Listed double wall pipe and Quadra-Fire Out-
side Air Kit in mobile homes. Single wall pipe
is approved for residential installations only.
*NOTE: Clearance to combustibles are for
standard pellet pipe. If pellet pipe manufac-
turer allows reduced clearances to their pipe,
reduced clearances are allowed.
standard pellet pipe. If pellet pipe manufac-
turer allows reduced clearances to their pipe,
reduced clearances are allowed.
C. Vertical into Existing Class A Chimney
D. Through The Wall & Vertical - Exterior
Firestop
Flashing
Rain Cap
6 in.
(152mm)
Min.
Non-combustible Hearth Pad
3 in. (76mm) Min.
Clean-out Cover
12 in. (305mm) Minimum
Ceiling Support
3 to 6 in. (76-152mm)
Offset Adapter
Offset Adapter
6 in. (152mm) Class A
Chimney Connector
Adapter
Chimney Connector
Adapter
3 to 3 in.
(76-76mm)
Top Vent Kit
(76-76mm)
Top Vent Kit
Non-combustible Hearth Pad
Clean-out
Cover
Cover
Tee
Wall Thimble
Support
Bracket
every 60 in.
(1524mm)
Bracket
every 60 in.
(1524mm)
12 in.
(305mm)
minimum
(305mm)
minimum
Rain
Cap
Cap
Flashing
2 in. (51mm) minimum
6 in. (152mm)
minimum
Figure 15.1
Figure 15.2
E. Vertical - Interior - Typical Installation
Firestop
Flashing
Rain Cap
6 in.
(152mm)
Min.
Non-combustible Hearth Pad
3 in. (76mm) Min.
Clean-out Cover
12 in.
(305mm)
Minimum
(305mm)
Minimum
3 in. to 3 in.
(76-76mm)
Top Vent Kit
(76-76mm)
Top Vent Kit
Figure 15.3