Quadra-Fire 32198A User Manual

Page 9

32198A February 15, 2002

Cape Cod Wood Stove

(In inches and millimeters)

FIGURE 4

In a Masonry Fireplace OR Through the Wall: Six inch (6") diameter listed double wall air insulated connector pipe with

listed factory-built Class “A” chimney or a masonry chimney. (Mobile Home must be equipped with a spark arrestor.)

Additional specifications include a maximum 8" deep mantel without heat shield and the following clearances:

A B C D E F G H I

N/A N/A 27.5"(698) 18"(457) N/A N/A 41"(1041) / 15"**(381) N/A 12" (305),

6"*(152)

CLEARANCES

FIGURE 4

**Maximum 8" deep mantel with heatshield spaced

1" from bottom mantel surface.

*With 52" high x 42" wide wall protection spaced 1"

from combustible surface..

If further clearances are needed, obtain requirements for construction of a protected wall from

your local building code authorities and their allowable reductions of the listed clearances.

WALL PROTECTOR SPECIFICATIONS:

MUST BE A MINIMUM OF 24 GAUGE

SHEET METAL WITH A 1" (25

) AIR

SPACE BETWEEN SHEET METAL AND

COMBUSTIBLE WALL. SHEET METAL

MAY THEN BE COVERED WITH BRICK

OR TILE.

MINIMUM CLEARANCES TO COMBUSTIBLES

CAUTION!

The baffle and kaowool blanket placement is

crucial to the optimum performance of the Cape

Cod. Follow the steps on pages 32 & 33 (Chimney

Cleaning), carefully to ensure proper placement of

baffles and kaowool at time of initial installation

and following chimney cleaning.

REAR VENT INSTALLATIONS

Max 8"

26-5/8"