Sherwood EG40 DV User Manual

EG40-070

SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY. THIS MANUAL IS PRINTED ON RECYCLED PAPER.

B Y : S H E R W O O D I N D U S T R I E S L T D

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

EG40 DV

OWNER’S MANUAL

This appliance may be installed in an after market

permanently located, manufactured (mobile)

home, where not prohibited by local codes.

This appliance is only for use with the type of gas

indicated on the rating plate. This appliance is

not convertible for use with other gases, unless a

certified kit is used.

WHAT TO DO IF YOU SMELL GAS

• Open windows/Extinguish any open flame.

• Do not try to light any appliance.

• Do not touch any electrical switch or use any

phone in your building.

• Immediately call your gas supplier from a

neighbour’s phone. Follow the gas supplier’s

instructions.

• If you cannot reach your gas supplier, call the

fire department.

WARNING

If the information in this manual is not followed exactly, a fire or explosion may

result causing property damage, personal injury or loss of life. Installation and

service must be performed by a qualified installer, service agency or the gas supplier.

FOR YOUR SAFETY: Do not store or use gasoline or other Flammable vapours and

liquids in the vicinity of this or any other appliance.

Massachusetts installations (Warning): This product must be installed by a licensed

plumber or gas fitter when installed within the Commonwealth of Massachusetts. Other

Massachusetts code requirements: Flexible connector must not be longer than 36in., a

shut off valve must be installed; only direct vent sealed combustion products are approved

for bedrooms/bathrooms. A carbon monoxide detector is required in all rooms containing

gas fired direct vent appliances.