Pioneer SPH-DA210 User Manual

Adjusting the 5-band graphic equalizer
You can adjust the level of each band for the 
equalizer curves.

❐

  A separate “Custom1” curve can be creat-

ed for each source. If you make adjust-
ments when a curve other than “Custom2” 
is selected, the equalizer curve settings will 
be recorded in “Custom1”. 

❐

  A “Custom2” curve that is common for all 

sources can be created. If you make adjust-
ments when the “Custom2” curve is se-
lected, the “Custom2” curve will be updat-
ed.

Ü

    For details, refer to Customizing the audio 

4  Tap the frequency that you want to ad-
just the level for.
You can select the following frequencies:
100Hz — 315Hz — 1.25kHz — 3.15kHz

 — 

5  Tap the screen to adjust the level of the 
equalizer band.
You can adjust the equalizer band level be-
tween “+12dB” and “–12dB”.

Loudness compensates for deficiencies in the 
low- and high-sound ranges at low volume.

Ü

    For details, refer to Customizing the audio 

2 Tap   or   next to “Loudness”.
Each time you tap   or 

,

 the level is select-

ed in the following order:
Off (default) — Low — Mid — High

This product is equipped with a subwoofer 
output that can be turned on or off.

❐

  The cut-off frequency and output level can 

be adjusted when the subwoofer output is 
on.

Ü

    For details, refer to Customizing the audio 

The “Subwoofer” screen appears.

3  Tap [Subwoofer] to set to “On”.
The subwoofer output is turned on.

■

  If you select “Off”, the subwoofer output is 

turned off.