Pioneer SPH-DA210 User Manual

Page of 86
Customizing preferences
14
Chapter
68
En
•  Color: Adjusts the color saturation.
•  Hue: Adjusts the tone of color (red or 
green is emphasized).
•  Dimmer: Adjusts the brightness of the 
display.
•  Temperature: Adjusts the color temper-
ature, resulting in a better white balance.
  You can adjust “Hue” only when “Video 
Signal Setting” is set to “NTSC”.
  With some rear view cameras, picture ad-
justment may not be possible.
6 Tap   or   to adjust the selected item.
Each time you tap   or 
,
 the level of the se-
lected item increases or decreases.
  If you want to switch the adjustment item, 
tap   or  .
 “Brightness”, “Contrast”, “Color”, “Hue” 
can be adjusted from “+24” to “–24”.
 “Dimmer” can be adjusted from “+1” to 
+48”.
 “Temperature” can be adjusted from “+3” 
to “–3”.
  You cannot operate this function while driv-
ing.
  Different “Brightness”, “Contrast”, 
Dimmer” settings can be set for when the 
illumination switch is on and when it is off.
  The same specifications are applied to all 
sources (Home screen, Settings screen, 
Radio, iPod music, Pandora) other than the 
video source. 
  The “Dimmer” setting is set to a common 
setting in all sources.
Setting the clock mode
You can change the time format.
1  Display the “System” screen.
Ü
    For details, refer to Customizing the 
2  Tap [Clock Mode].
Tapping [Clock Mode] changes the settings 
as follows:
•  12H (default):
  Changes the display to 12-hour format.
•  24H:
  Changes the display to 24-hour format.
Selecting the background display
You can change the audio source screen 
background and Home screen background.
1  Display the “System” screen.
Ü
    For details, refer to Customizing the 
2  Tap [Background].
The background screen appears.
3  Tap the desired background display.
Restoring the default settings
Resets various settings registered to this prod-
uct and restores them to the default settings.
 
System Reset
” can be set only when 
the source is set to “
OFF
”.
1  Display the “System” screen.
Ü
    For details, refer to Customizing the