Pioneer SPH-DA210 User Manual

The display is very dim.

Picture quality adjustment of the dis-

play is not correct.

Adjust the picture quality. (Page 67)

No sounds are produced from an 

audio source. 

The volume level will not rise.

The volume level is low.

Adjust the volume level.

The mute is on.

Turn the mute off.

A speaker lead is disconnected.

Check the connection.

The person on the other end of  

the phone call cannot hear the 

conversation due to an echo.

The voice from the person on the oth-

er end of the phone call is output 

from the speakers and then picked 

up by the microphone again, creating 

an echo.

Use the following methods to reduce the 

echo: 

—Lower the volume on the receiver 

—Have both parties pause slightly before 

speaking

There is no picture.

The parking brake cord is not con-

nected.

Connect the parking brake cord, and ap-

ply the parking brake.

The parking brake is not applied.

Connect the parking brake cord, and ap-

ply the parking brake.

The backlight of the LCD panel is 

turned off.

Turn on the backlight. (Page 71)

Nothing is displayed and the 

touch panel keys cannot be  

used.

The setting for the rear view camera 

is incorrect.

Select the appropriate setting for the rear 

view camera.

The shift lever was placed in [R] 

when the rear view camera was not 

connected.

Select the correct polarity setting for 

“Camera Polarity”. (Page 66)

iPod cannot be operated.

The iPod is frozen.

Reconnect the iPod with the suitable 

cable.

An error has occurred.

Reconnect the iPod with the suitable 

cable.

No sounds are produced.

The volume level will not rise.

Cables are not connected correctly.

Connect the cables correctly.

Music in an iPod cannot be 

played.

A playable music is not selected.

Select music using the search function.

Dialing is not possible.

Your mobile device is out of range for 

service.

Retry after re-entering the range for ser-

vice.

The connection between the mobile 

device and this product cannot be es-

tablished now.

Perform the connection process.