Roberts Radio CRD-39 User Manual

26

You can connect your radio to an external amplifi er or recorder. This may 
be a stand-alone unit or it may be part of your existing hi-fi  system.

1.  Connect the optical toslink connector to the optical input socket(s) on 

your amplifi er or recorder using a suitable cable.

Your radio has fi ve alarm/timers which can be set to switch on your radio 
at a preset day, time, and station.  See section on page 21 for details on 
how to set alarm/timers

1.  A  programme/station can be recorded to an external device via the 

optical toslink connector located on the rear of your radio. Connect 
the optical toslink connector to the optical input socket(s) on your  
recorder using a suitable cable.

 

Most mini disc units have a record pause mode that enables the mini 
disc to start recording as soon as a signal appears on the mini disc 
input.  When your radio switches on controlled by the alarm timer the 
mini disc will start recording.

 

Subsequent timer events are then recorded onto track 2,3, etc. Consult 
your hi-fi  or mini disc user guide for further details. The volume on 
your radio can be set to 0 so that you will not be disturbed during the 
recording. The volume control does not affect the recording level.

 

Note: The timer record function is for personal use only.

1