Sony MKE-9040M User Manual
1-6
MVE-9000 IM
1
2
3
Fixing screw
Fixing screw
Connector board
Blank panel
B3
x 5
B3
x 5
1
2
3
4
5
6
7
8
7
8
1-4-2. Installing the Connector Board
The board slot
Name of option
Name of board
Slot on the rear side
MKE-9020M
CN-2357A board
3
CN-2357B board
5
MKE-9021M
CN-2355A board
3
CN-2355B board
5
Installation procedure
1.
1.
Remove the two screws and remove the blank panel.
n
Store the removed blank panel in a safe location.
n
Store the removed blank panel in a safe location.
The following procedures vary with the options.
In the case of other than MKE-9020M
2.
2.
Insert the connector board horizontally level and
secure it with the two fixing screws.
secure it with the two fixing screws.
In the case of MKE-9020M
Parts required (Supplied accessory of MKE-9020M)
. Connecting cable
. Harness support
. Cover panel
. Screws (Two of PSW3 x 6)
Parts required (Supplied accessory of MKE-9020M)
. Connecting cable
. Harness support
. Cover panel
. Screws (Two of PSW3 x 6)
Perform the following procedures after step 1.
2.
2.
While the board levers are kept open as shown in the
illustration, insert the connector board into the board
guide rails.
illustration, insert the connector board into the board
guide rails.
3.
While closing the board levers in the direction of
arrow 1, push in the connector board and secure it
with the two screws.
arrow 1, push in the connector board and secure it
with the two screws.
(Continued)
Connector board
1
2
3
Fixing screw
Fixing screw
Board lever
Board lever
1
1