Roberts Radio RD-12CFM User Manual
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
4
Operating your radio
1.
Fully extend the telescopic aerial
2.
Press the On/Off button to switch on your radio. The display will
show "Roberts DAB digital radio" for a few seconds.
show "Roberts DAB digital radio" for a few seconds.
3.
If this is the first time the radio is used a quick scan of UK Band III DAB
channels will be carried out. The display will show "Autotune Quick
scan". If the radio has been used before the last used station will be
selected.
channels will be carried out. The display will show "Autotune Quick
scan". If the radio has been used before the last used station will be
selected.
4.
During Autotune as each group of stations is detected the bottom line
of the display will show its name and the station count will be updated.
The top line of the display shows a bargraph indicating progress of
the Autotune.
of the display will show its name and the station count will be updated.
The top line of the display shows a bargraph indicating progress of
the Autotune.
5.
When the Auto tune is complete the first station (in numeric-alpha
order 0...9...A....Z) will be selected.
order 0...9...A....Z) will be selected.
6.
If the station list is still empty after the Autotune you radio will display
"No Signal".
"No Signal".
7.
If no signals are found it may be necessary to relocate your radio
to a position giving better reception.
to a position giving better reception.
2