Roberts Radio RD-59 User Manual

12

1.  Carefully extend the telescopic aerial.

2. Press 

the 

On/Off button to switch on your radio. The display will show 

"ROBERTS" for a few seconds. 

3. Press 

the 

Band button to select the FM band.

4.  Press and release the Select button until the display shows 

"Auto tune <>".

5. Press 

the 

Tuning Up button. Your radio will scan from the currently 

displayed frequency direction upwards and will stop scanning when 
it fi nds a station of suffi cient strength. 

6.  The display will show the frequency of the signal which has been 

found. If RDS information is available, after a few seconds the display 
will show the radio station name. The display will also show "St" and 
"RDS" on the upper line if the station is received with stereo and RDS 
information.

7. Press 

the 

Tuning Down button to scan the FM band in a downwards 

direction (high frequency to low frequency).

8.  When the end of the waveband is reached your radio will recommence 

tuning from the opposite end of the waveband.

9. Adjust 

the 

Volume control to the required setting.

10.  To switch off your radio press the On/Off button.

3

2

5

4

7