Roberts Radio RD-6 User Manual
5
Operating your radio - DAB
1.
Fully extend the telescopic aerial.
2.
Press the On/Off button to switch on your radio. The display will show
"Roberts DAB digital radio" for a few seconds.
"Roberts DAB digital radio" for a few seconds.
3.
If this is the first time the radio is used a quick scan of UK Band III DAB
channels will be carried out. The display will show "Autotune Quick
scan". If the radio has been used before the last used station will be
selected.
channels will be carried out. The display will show "Autotune Quick
scan". If the radio has been used before the last used station will be
selected.
4.
During Autotune as each group of stations is detected the bottom line
of the display will show its name and the station count will be updated.
The top line of the display shows a bargraph indicating progress of the
Autotune.
of the display will show its name and the station count will be updated.
The top line of the display shows a bargraph indicating progress of the
Autotune.
5.
When the Auto tune is complete the first station (in numeric-alpha order
0...9...A....Z) will be selected.
0...9...A....Z) will be selected.
6.
If the station list is still empty after the Autotune your radio will display
"No Signal".
"No Signal".
7.
If no signals are found it may be necessary to relocate your radio to a
position giving better reception.
position giving better reception.
rd-6 instruction book.pmd
2/26/2004, 8:54 AM
6