Roberts Radio RD-6 User Manual

8

As time passes new stations may become available. To find new stations
proceed as follows:-

1.

Press and release the AutoTune button, the display will show "Autotune
Quick Scan". Your radio will perform a scan of the UK DAB frequencies.
As new stations are found the station counter on the right-hand side of
the display will increase and stations will be added to the list

2.

To carry out a full scan of the entire DAB Band III frequencies press and
hold down the AutoTune button for more than 2 seconds and then
release. The display will show "Autotune Full scan". As new stations are
found the station counter on the right-hand side of the display will
increase and stations will be added to the list

As an alternative to pressing the tuning control to select a station your radio
can be set so as to automatically select a station.

1.

Rotate the Tuning control a few clicks in either direction, immediately
press and hold in the tuning control until the display shows "Autoselect
ON".

2.

Rotate the Tuning control until the station you require is visible on the
display, after a few seconds your  radio will automatically select the
station shown on the display.

3.

To switch off Autoselect rotate the Tuning control a few clicks in either
direction, immediately press and hold in the Tuning control until the
display shows "Autoselect OFF".

rd-6 instruction book.pmd

2/26/2004, 8:54 AM

9