Roberts Radio RD-46 User Manual

9

1

As time passes new stations may become available. To find new stations

proceed as follows:-

1.  Press  and  release  the 

Auto  Tune  button,  the  display  will  show  

"Auto  tune  Quick  scan". Your  radio  will  perform  a  scan  of  the  UK

DAB frequencies. As new stations are found the station counter on

the right-hand side of the display will increase and stations will be

added to the list.

2.  To carry out a full scan of the entire DAB Band III frequencies press

and hold down the 

Auto Tune button for more than 2 seconds and 

then release. The display will show "Auto tune Full scan". As new 

stations are found the station counter on the right-hand side of the

display will increase and stations will be added to the list.

1.  Press and release the Select button until the display will show signal 

strength. 

2.  Position your radio and carefully angle  the telescopic aerial for best 

reception using the signal strength display as a  guide. Move your 

radio around and position so as to give maximum number of black 

rectangles  on  signal  strength  display.  The  clear  unfilled  rectangle

indicates minimum signal level required for satisfactory reception.

3.  Press the Select button to exit the signal strength display.

2

1,3